HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 168
Jumpers, LED indicators, Front panel LED indicators
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Item Designator Description 20 J25 SATA 5 connector 21 XBT1 Battery CAUTION: The TPM is not a customer-removable part. Any attempt to remove an installed TPM from the system board breaks or disfigures the TPM security rivet. Upon locating a broken or disfigured rivet on an installed TPM, administrators should consider the system compromised and take appropriate measures to ensure the integrity of the system data. If you suspect a TPM board failure, leave the TPM installed and remove the system board. Contact an HP authorized service provider for a replacement system board and TPM board. Jumpers Password (J50) and chassis ID (J45) jumpers. Table 19 describes the jumper settings. Table 19 System Configuration Switch Settings Jumper Description Pin 1-2 (default) Pin 2-3 J50 Password J45 Chassis ID Password Reset Default Setting Clear CMOS LED indicators This section contains illustration and descriptions of internal and external status LED indicators located on the: • Front panel • Rear panel These LED indicators aid in problem diagnosis by indicating the status of system components and operations of the server. Front panel LED indicators The front panel LED indicators allow constant monitoring of basic system functions while the server is operating. Connectors, switches, and LEDs 168