HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 94
Removal and replacement procedures, Removing the Onboard SATA Cable Guard/Battery Holder
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
Figure 69 Removing the Onboard SATA Cable Guard/Battery Holder 3. Remove the Mini SAS cable guard from the system board tray as Figure 58. 4. Unplug the Mini SAS to Mini SATA cables from the adapter board and the system board. Figure 70 Removing the Mini SAS to Mini SATA Cables from the 1U Node 5. Loosen the screw on the top side of the system board tray to release the 1U PCIe cage from the system board tray. 6. Push the locking tab to release the 1U PCIe cage from the system board tray. 7. Lift the 1U PCIe cage away from the system board. Removal and replacement procedures 94
Removal and replacement procedures
94
Figure 69
Removing the Onboard SATA Cable Guard/Battery Holder
3.
Remove the Mini SAS cable guard from the system board tray as Figure 58.
4.
Unplug the Mini SAS to Mini SATA cables from the adapter board and the system board.
Figure 70
Removing the Mini SAS to Mini SATA Cables from the 1U Node
5.
Loosen the screw on the top side of the system board tray to release the 1U PCIe cage from the
system board tray.
6.
Push the locking tab to release the 1U PCIe cage from the system board tray.
7.
Lift the 1U PCIe cage away from the system board.