HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 133
Removal and replacement procedures
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 133 highlights
Figure 140 Installing the 2U PCIe Cage Assembly with GPU to the System Board 6. Connect the GPU power cables. To connect the single-slot GPU power cables: a. Route the GPU power cable through the hole on the right side of the 2U PCIe cage assembly and along the rear wall as shown in figure below. b. Connect the 2x3 pin GPU power cable connector to the 2x3 pin power connector on the single-slot GPU. c. Connect the 2x6 pin GPU power cable connector to the 2x6 pin power connector on the top adapter board. NOTE: The 2x6 pin power connector of the bottom adapter board is to be connected to the 2x6 pin power connector on the system board. Figure 141 Connecting Power Cable for the Single-Slot GPU To connect the double-slot GPU power cables: a. Route the GPU power cable through the hole on the right side of the 2U PCIe cage assembly and along the rear wall as shown in figure below. b. Connect the 2x4 pin GPU power cable connector to the 2x4 pin power connector on the double-slot GPU. Removal and replacement procedures 133