HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 114
Installing the smart array P410 controller board,
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Figure 106 Removing the Card Holder Bracket from the 2U PCIe Cage Assembly with P410 11. Loosen and remove the screw to release the smart array P410 controller board from the 2U PCIe cage. 12. Unplug the smart array P410 controller board from the 2U PCIe cage. Figure 107 Removing the Smart Array P410 Controller Board from the 2U PCIe Cage 13. Disconnect the Right Exit and U Type Mini SAS to Mini SAS cables from the smart array P410 controller board as shown in Figure 101. Installing the smart array P410 controller board To install the smart array P410 controller board on a 1U node: 1. Remove the onboard SATA cable guard/battery holder from the system board tray as shown in Figure 69. 2. Remove the Mini SAS cable guard from the system board tray as shown in Figure 58. Removal and replacement procedures 114