HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 93
Installing the smart array P212 card, Removal and replacement procedures
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Figure 68 Removing the Smart Array P212 Controller Board from the 2U PCIe Cage 13. Disconnect the Mini SAS to Mini SAS cable from the smart array P212 controller board as shown in Figure 62. Installing the smart array P212 card To install the smart array P212 controller board on the 1U node: 1. Press the tab to release the onboard SATA cable guard/battery holder from the system board tray. 2. Move the onboard SATA cable guard/battery holder in the direction as shown in figure below, and lift it away from the system board. NOTE: Before removing the onboard SATA cable guard/battery holder from the chassis, please remove the super-capacitor pack and cable if installed. Please refer to the section of "Supercapacitor Pack" for reference. Removal and replacement procedures 93