HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 88
Removal and replacement procedures, Removing the Mini SAS Cable Guard
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Figure 58 Removing the Mini SAS Cable Guard 3. Disconnect the Mini SAS to Mini SAS cable from the Mini SAS connector 1 on the adapter card. Figure 59 Disconnecting the Mini SAS to Mini SAS Cable from the Adapter Board 4. Loosen and remove the screw on the top side of the system board tray to release the 1U PCIe cage assembly from the system board tray. 5. Push the locking tabs to release the 1U PCIe cage assembly from the system board tray. 6. Lift the 1U PCIe cage assembly away from the system board tray. Removal and replacement procedures 88
Removal and replacement procedures
88
Figure 58
Removing the Mini SAS Cable Guard
3.
Disconnect the Mini SAS to Mini SAS cable from the Mini SAS connector 1 on the adapter card.
Figure 59
Disconnecting the Mini SAS to Mini SAS Cable from the Adapter Board
4.
Loosen and remove the screw on the top side of the system board tray to release the 1U PCIe
cage assembly from the system board tray.
5.
Push the locking tabs to release the 1U PCIe cage assembly from the system board tray.
6.
Lift the 1U PCIe cage assembly away from the system board tray.