HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 55
Cable routing, the HP ProLiant DL170e G6 server - g6 servers
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
Cable routing The following figures show the cable routing methods for the following configurations supported by the HP ProLiant DL170e G6 server: • 8 LFF HDDs / 4 nodes • 8 LFF HDDs / 2 nodes • 12 LFF HDDs / 4 nodes • 12 LFF HDDs / 2 nodes • 16 SFF HDDs / 4 nodes • 16 SFF HDDs / 2 nodes • 24 SFF HDDs / 4 nodes • 24 SFF HDDs / 2 nodes Colored figures are adopted in this section for clearer presentation of cable routings for the above configurations. The following colors are used in the figures standing for the various types of cables: Table 18 Description for Colors of Cables Presented in the Figures Item Description System fan power cable HDD backplane power cable Power signal cable RPS cable 1 (bottom power backplane RPS connector to bottom midplane RPS connector) RPS cable 2 (bottom power backplane RPS connector to top midplane RPS connector) Mini-SAS to 4-SATA/SGPIO cable Mini-SAS to 2-SATA cable Bottom midplane to HDD backplane Mini-SAS/Mini-SATA cable (see table under each figure for details) Top midplane to HDD backplane Mini-SAS/Mini-SATA cable (see table under each figure for details) (P410) Right Exit Mini-SAS to Mini-SAS cable (P410) U Type Mini-SAS to Mini-SAS cable Ear board cable For connection details of each cable, please refer to the section of Cable connections. Removal and replacement procedures 55
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/55.png)