HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 76
To remove the memory module, CAUTION
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
Figure 37 DIMM Slots NOTE: Before removing and replacing memory modules, please refer to Removal and replacement procedures for more information. NOTE: For 2U node, before removing or installing the memory, remove the 2U bottom plastic air baffle first. For detailed information, please refer to Figure 83. To remove the memory module: 1. Completely open the holding clips securing the memory module. 2. Gently pull the memory module upward to remove it from the slot. Figure 38 Removing the Memory Module CAUTION: Place the memory module on a static-dissipating work surface or inside of an anti-static bag. Removal and replacement procedures 76
Removal and replacement procedures
76
Figure 37
DIMM Slots
NOTE:
Before removing and replacing memory modules, please refer to Removal and replacement
procedures for more information.
NOTE:
For 2U node, before removing or installing the memory, remove the 2U bottom plastic air
baffle first. For detailed information, please refer to Figure 83.
To remove the memory module:
1.
Completely open the holding clips securing the memory module.
2.
Gently pull the memory module upward to remove it from the slot.
Figure 38
Removing the Memory Module
CAUTION:
Place the memory module on a static-dissipating work surface or inside of an anti-static
bag.