HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 151
Removal and replacement procedures, Removing the Bottom Power Backplane
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 151 highlights
Figure 170 Removing the Bottom Power Backplane 6. Loosen the 4 screws that secure the big C bus bar pair to the bottom power backplane. 7. Remove the big C bus bar pair from the bottom power backplane. Figure 171 Removing the Big C Bus Bar Pair To remove the small C bus bar pair: After the bus bar links are removed from the chassis, the small C bus bar pair can be removed as follows: 1. Remove the fan cage from the chassis as shown in Figure 25. 2. Remove all cables from the midplanes. 3. Loosen the 4 screws that secure the midplane assembly to the chassis. 4. Lift out the midplane assembly from the chassis. Removal and replacement procedures 151
Removal and replacement procedures
151
Figure 170
Removing the Bottom Power Backplane
6.
Loosen the 4 screws that secure the big C bus bar pair to the bottom power backplane.
7.
Remove the big C bus bar pair from the bottom power backplane.
Figure 171
Removing the Big C Bus Bar Pair
To remove the small C bus bar pair:
After the bus bar links are removed from the chassis, the small C bus bar pair can be removed as
follows:
1.
Remove the fan cage from the chassis as shown in Figure 25.
2.
Remove all cables from the midplanes.
3.
Loosen the 4 screws that secure the midplane assembly to the chassis.
4.
Lift out the midplane assembly from the chassis.