HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 117
Installing the Smart Array P410 Controller Board to a 1U PCIe Cage
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 117 highlights
Figure 111 Installing the Smart Array P410 Controller Board to a 1U PCIe Cage 13. Align the 1U PCIe cage assembly to the system board tray, and then press it down to ensure full connection to the system board. Make sure that the spools on the sides of the 1U PCIe cage assembly are located in the corresponding slots on the system board tray. 14. Install the screw on the top side of the system board tray to secure the 1U PCIe cage assembly to the system board tray. Figure 112 Installing the 1U PCIe Cage Assembly with P410 to the System Board 15. Install the onboard SATA cable guard/battery holder as shown in Figure 78. 16. Route the Right Exit and U Type Mini SAS to Mini SAS cables along the side of the system board tray as shown in figure below. 17. Connect the Right Exit Mini SAS to Mini SAS cable to the Mini SAS connector 1 on the adapter card. Removal and replacement procedures 117
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/117.png)