HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 109
Smart array P410 controller board
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 109 highlights
Smart array P410 controller board Figure 97 Smart Array P410 Controller Board Item 1 2 3 4 5 Description Debug connector DDR2 Mini-DIMM cache module Mini SAS connector 2 Mini SAS connector 1 244-pin Mini-DIMM connector Removing the smart array P410 controller board To remove the smart array P410 controller board from the 1U node: 1. Remove the Mini SAS cable guard from the system board tray as shown in Figure 58. 2. Disconnect the Right Exit and U Type Mini SAS to Mini SAS cables from the Mini SAS connectors on the adapter card. Removal and replacement procedures 109
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/109.png)
Removal and replacement procedures
109
Smart array P410 controller board
Figure 97
Smart Array P410 Controller Board
Item
Description
1
Debug connector
2
DDR2 Mini-DIMM cache module
3
Mini SAS connector 2
4
Mini SAS connector 1
5
244-pin Mini-DIMM connector
Removing the smart array P410 controller board
To remove the smart array P410 controller board from the 1U node:
1.
Remove the Mini SAS cable guard from the system board tray as shown in Figure 58.
2.
Disconnect the Right Exit and U Type Mini SAS to Mini SAS cables from the Mini SAS connectors
on the adapter card.