HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 113
HP ProLiant DL170e - G6 Server Manual
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 113 highlights
Figure 104 Disconnecting the Right Exit and U Type Mini SAS Cables from the Adapter Board 6. Push the locking tabs to release the 2U PCIe cage assembly from the system board tray. 7. Lift the 2U PCIe cage assembly from the system board tray. Figure 105 Removing the 2U PCIe Cage Assembly with P410 8. Loosen the thumbscrew that secures the card holder bracket to the 2U PCIe cage assembly. 9. Lift and route one end of the card holder bracket away from the 2U PCIe cage assembly. 10. Remove the other end of the card holder bracket away from the slot of the 2U PCIe cage assembly. Removal and replacement procedures 113
Removal and replacement procedures
113
Figure 104
Disconnecting the Right Exit and U Type Mini SAS Cables from the Adapter Board
6.
Push the locking tabs to release the 2U PCIe cage assembly from the system board tray.
7.
Lift the 2U PCIe cage assembly from the system board tray.
Figure 105
Removing the 2U PCIe Cage Assembly with P410
8.
Loosen the thumbscrew that secures the card holder bracket to the 2U PCIe cage assembly.
9.
Lift and route one end of the card holder bracket away from the 2U PCIe cage assembly.
10.
Remove the other end of the card holder bracket away from the slot of the 2U PCIe cage
assembly.