HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 90
Disconnecting the Mini SAS to Mini SAS cable from the Smart Array P212 Controller Board,
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 90 highlights
Figure 62 Disconnecting the Mini SAS to Mini SAS cable from the Smart Array P212 Controller Board To remove the smart array P212 controller board from the 2U node: 1. Loosen and remove the 2 screws to release the 2U upper sheet metal air baffle from the adapter board bracket. 2. Lift the 2U upper sheet metal air baffle away from the system board tray. Figure 63 Removing the 2U Upper Sheet Metal Air Baffle 3. Loosen and remove the 4 screws to release the adapter board bracket from the system board tray. 4. Lift the adapter board bracket away from the system board tray. Removal and replacement procedures 90
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/90.png)
Removal and replacement procedures
90
Figure 62
Disconnecting the Mini SAS to Mini SAS cable from the Smart Array P212 Controller Board
To remove the smart array P212 controller board from the 2U node:
1.
Loosen and remove the 2 screws to release the 2U upper sheet metal air baffle from the adapter
board bracket.
2.
Lift the 2U upper sheet metal air baffle away from the system board tray.
Figure 63
Removing the 2U Upper Sheet Metal Air Baffle
3.
Loosen and remove the 4 screws to release the adapter board bracket from the system board
tray.
4.
Lift the adapter board bracket away from the system board tray.