HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 97
Installing the Mini SAS to Mini SAS Cable to the Smart Array P212 Controller Board
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
Figure 75 Installing the Mini SAS to Mini SAS Cable to the Smart Array P212 Controller Board 14. Align and install the smart array P212 controller board to the connector on the 1U riser card. 15. Install the screw to secure the smart array P212 controller board to the 1U PCIe cage. Figure 76 Installing the Smart Array P212 Controller Board to a 1U PCIe Cage 16. Align the 1U PCIe cage assembly to the system board tray, and then press it down to ensure full connection to the system board. Make sure that the spools on the sides of the 1U PCIe cage assembly are located in the corresponding slots on the system board tray. 17. Install the screw on the top side of the system board tray to secure the 1U PCIe cage assembly to the system board tray. Removal and replacement procedures 97