HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 105
Installing the Full-Height Vented Bracket to the Smart Array P212 Controller Board
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 105 highlights
Figure 90 Installing the Full-Height Vented Bracket to the Smart Array P212 Controller Board 20. Install the Mini SAS to Mini SAS cable to the Mini SAS connector J6 on the smart array P212 controller board as shown in Figure 75. 21. Align and install the smart array P212 controller board with its matching connector. 22. Install the screw to secure the smart array P212 controller board to the 2U PCIe cage. 23. Route the Mini SAS to Mini SAS cable through the hole of the 2U PCIe cage as shown in figure below. Figure 91 Installing the Smart Array P212 Controller Board to a 2U PCIe Cage 24. Align one end of the card holder bracket into the slot of the 2U PCIe cage. 25. Route the card holder bracket down to attach it. Make sure that the stand off on the 2U PCIe cage is aligned to the slot on the card holder bracket. 26. Tighten the thumbscrew to secure the card holder bracket to the 2U PCIe cage. Removal and replacement procedures 105