HP Z3100 HP Designjet Z3100ps GP Photo Printer - User's Guide - Page 138
Replace, minutes. If the printer finds problems in preparing the printheads, it takes longer
UPC - 882780677531
View all HP Z3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 138 highlights
9. Lower the handle to rest on the carriage lid. When all the printheads have been inserted correctly and are accepted by the printer, the printer beeps. NOTE: If the printer does not beep when you insert the printhead and the Replace message appears on the front-panel display, the printhead may need to be reinserted. 10. Close the window. 11. The front-panel display confirms that all printheads are correctly inserted. The printer starts checking and preparing the printheads. The default routine process, when all printheads are changed, takes 25 minutes. If the printer finds problems in preparing the printheads, it takes longer, up to 65 minutes. For a single printhead insertion, the times vary between 20 and 40 minutes. After all printheads are checked and prepared, the printhead realignment procedure runs automatically if paper is loaded, see Align the printheads on page 182. Ink and printheads 128 Chapter 9 Handling ink cartridges and printheads ENWW