HP Z3100 HP Designjet Z3100ps GP Photo Printer - User's Guide - Page 39
Load a roll into the printer, Easy loading procedure
UPC - 882780677531
View all HP Z3100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
6. Put the blue paper stop on to the open end of the spindle, and push it towards the end of the roll. 7. Ensure the blue paper stop is pushed in as far as it goes; until both ends are against the stoppers. If you are a regular user of different paper types, you can change rolls more quickly if you preload rolls of different paper types on different spindles. Extra spindles are available for purchase, see Accessories on page 139. Load a roll into the printer There are two ways to load a roll. The easy loading procedure is recommended. CAUTION: To start these procedures you must have a roll loaded on the spindle. See Load a roll onto the spindle on page 27. Easy loading procedure 1. Check that you are using the correct spindle for your type of paper, see Choose which spindle to use on page 26. 2. Standing behind the printer, rest the spindle's black end on the left side roll holder. Do not put the end completely into the roll holder. Paper handling ENWW Load a roll into the printer 29