IBM 86884RX Maintenance Manual - Page 142
connectors
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 142 highlights
8. Remove the PCI-X board assembly from the I/O board: a. Remove any adapters and adapter separators that are installed (see "Installing an adapter" on page 92), unplugging any necessary cables. b. Release the PCI-X board assembly from the I/O board at the four notches that secure them together, then lift the PCI-X board assembly off of the I/O board and set it in a safe place. Notches PCI-X Assembly Tabs PCI-X Board I/O Board 9. Remove the VRM from the I/O board. 10. Remove all screws securing serial ports and video connectors to the back of the I/O board assembly. 11. Remove the eight screws securing the I/O board to the I/O board assembly, and slide the I/O board approximately 1 in. (2.54 cm) forward. 132 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide