IBM 86884RX Maintenance Manual - Page 177
Video, error, codes
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 177 highlights
Code/Explanation 0550h (Read timeout .) 0560h (File not found.) 0580h (Cannot allocate memory.) 0590h (Command not supported. Unable to run the test on the device.) FRU/Action 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 1. Check if AMIDiag CD is present in drive. 2. Confirm that drive is configured. 3. Check drive cables and connections. 4. Drive. 5. I/O board or SCSI add-on controller. Restart the server and retry. 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. Video test error codes Code/Explanation 0900h (Vertical Synchronization Test failed.) 0901h (Horizontal Synchronization Test failed.) 0902h (Graphics controller test failed.) 0903h (Attribute controller test failed.) 0904h (DAC register test failed.) 0905h (Video adapter memory R/W test failed .) 2100h (Video adapter attribute test failed. ) 2102h (Video adapter color test failed.) 2110h - 2120h (Param1 x Param2 mode test failed.) FRU/Action I/O board I/O board I/O board I/O board I/O board I/O board 1. Video monitor 2. I/O board 1. Video monitor 2. I/O board 1. Video monitor 2. I/O board USB test error codes If any of the following USB errors occur on devices not directly attached to a USB port on the xSeries 450 (for example, a USB mouse attached to a USB keyboard with an internal USB hub), connect the suspect device directly to the xSeries 450 and re-run the failing test to isolate whether the failure is with an intermediate device, the device being tested, or the USB subsystem of the xSeries 450. In cases where the direct attachment passes, replace the intermediate devices and re-test in the original configuration before replacing the device being tested or the I/O board. Chapter 6. Symptom-to-FRU index 167