IBM 86884RX Maintenance Manual - Page 99
Removing, replacing, bezel
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
Removing and replacing the bezel Complete the following steps to remove the bezel: 1. Press on the two tabs at the top edge of the bezel, and pull the top of the bezel slightly away from the server. 2. Press on the two tabs at the bottom edge of the bezel, and pull the bezel off the server. Store the bezel in a safe place. 6 Common FRU Numbers 4 5 I/O Board System Management Board PCI Board Light-Path Diagnostics Upper CEC Lower CEC 1 Midplane Board 2 3 NOTE: FOR PROPER FRONT OF BOX AIRFLOW, NOTE: FOR PROPER AIRFLOW, FRONT OF BOX REPLACE FAN WITHIN 2 MINUTES REPLACE FAN WITHIN 2 MINUTES Complete the following steps to replace the bezel: 1. Align the four tabs on the bezel with the slots in the server chassis. 2. Press firmly against the front of the bezel until it snaps into place. 6 Common FRU Numbers 4 5 I/O Board System Management Board PCI Board Light-Path Diagnostics Upper CEC Lower CEC 1 Midplane Board 2 3 NOTE: FOR PROPER FRONT OF BOX AIRFLOW, NOTE: FOR PROPER AIRFLOW, FRONT OF BOX REPLACE FAN WITHIN 2 MINUTES REPLACE FAN WITHIN 2 MINUTES Chapter 4. Installing options 89