IBM 86884RX Maintenance Manual - Page 168
information
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Service Processor message FRU/action System shutoff due to high ambient temperature 1. Check room temperature. 2. Check for airflow obstructions. 3. Check fans. 4. Light Path assembly. Xcel4 Accelerator Cache Error Detected. Processor board Uncorrectable memory error on DIMMs x, y 1. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 2. DIMMs x, y. VRM 1-4 Fault 1. Check microprocessor 1-4 power module cable. 2. Microprocessor 1-4 power module. +2.5v VRM power fault 1. Memory board 2.5v VRM 2. Memory board +1.8v VRM power fault 1. Memory board 1.8v VRM 2. Memory board 1.8v Fault 1. Processor-board 1.8v VRM 2. Processor-board assembly 1.25v Fault Processor board Memory +1.8v Power fault 1. Memory board 1.8v VRM 2. Memory board Memory +1.25v Power fault 1. Memory board 1.25v VRM 2. Memory board Primary I/O Power fault I/O board Environmental Monitor Flash Update Failed. 1. Retry Flash Update. 2. I/O board. Environmental Monitor ROM error. 1. Remove ac power for 20 seconds, reconnect, and run diagnostics. 2. Flash update system-management firmware. 3. I/O board. Environmental Monitor RAM error 1. Remove ac power for 20 seconds, reconnect, and run diagnostics. 2. I/O board. Environmental Monitor firmware needs updating. Flash update system-management firmware. No environmental information currently available. The service processor also generates a large number of information, error, and warning messages. If an RXE-100 unit is attached, the service processor might generate further messages specific to this unit. For information about these error messages, see "RXE port error codes" on page 173. 158 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide