IBM 86884RX Maintenance Manual - Page 192
Error, message/explanation, FRU/action, Memory, board, Processor, Midplane, PCI-X
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Table 13. Phase 1 initial VRM determination error codes (continued) Error message/explanation FRU/action 0a (+1.8v PowerGood Fault) Memory board 1.8v VRM (J31) 0b (+1.8v VRM not installed) Processor board 1.8v VRM (J133) 0c (+1,8v PowerGood Fault) Processor board 1.8v VRM (J133) 0d (+1.2v PowerGood Fault) Processor board 0E (PPOD PowerGood Fault) Processor board *This code is displayed for a few moments after server reset or power on; then, the server continues with the startup process. Table 14. Phase 2 clock status error codes Error message/explanation 11 (33 MHz clock) 12 (14.3 MHz clock) 13 (62.5 MHz clock) 14 (200 MHz clock) FRU/action I/O board I/O board Midplane board 1. Processor board 2. I/O board Table 15. Phase 3 subsystem control status error codes Error message/explanation 21 (PCI-X board fault or VRM not installed) 22 (PCI-X board fault) 23 (I/O board fault) 24 (Compatibility RESET failed to deassert) 25 (Cyclone initialization fault) 26 (Tornado initialization fault) 27 (Front-side RESET fault. Reset failed to assert.) 28 (Front-side RESET fault. Reset failed to de-assert.) 29 (First Instruction Fetch Failed.) FRU/action PCI-X board PCI-X board I/O board I/O board 1. Memory board 2. Midplane board 3. I/O board 1. Processor board 2. Midplane board 1. Processor board 2. Midplane board 1. Processor board 2. Midplane board I/O board Table 16. Phase 4 I2C status error codes Error message/explanation 31 (DMC SDA stuck low) 32 (DMC SCL stuck low) 33 (Midplane SDA stuck low) 34 (Midplane SCL stuck low) FRU/action I/O board I/O board Midplane board Midplane board 182 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide