IBM 86884RX Maintenance Manual - Page 54
Memory, diagnostic, tests, device
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Memory diagnostic tests Use the memory diagnostic tests to make sure that the memory board and installed memory are properly seated and functioning correctly. You can test all memory and the memory board, or you can isolate a single memory bank to verify that it functions correctly. The following test modes are available: v Quick test runs a single test pattern through the entire free, installed memory space of the banks selected. v Full test runs 18 patterns, including pseudo-random patterns through the entire free, installed memory space of the banks selected. To run the Quick Memory Test over all memory banks, complete the following steps: 1. From the AMIDiag main menu, select Memory, and press Enter. 2. Select Quick Memory Test, and press Enter. 3. Select All Banks, Quick Test, and press Enter. To run full diagnostic tests over all memory banks, complete the following steps: 1. From the AMIDiag main menu, select Memory, and press Enter. 2. Select Full Memory Test, and press Enter. 3. Select All Banks, Full Test, and press Enter. To run the Quick Memory Test over a single memory bank, complete the following steps: 1. From the AMIDiag main menu, select Memory, and press Enter. 2. Select Quick Memory Test, and press Enter. 3. Select the individual bank you want to test or select Bank n, Quick Test, and press Enter. To run the Full Memory Test over a single memory bank, complete the following steps: 1. From the AMIDiag main menu, select Memory, and press Enter. 2. Select Full Memory Test, and press Enter. 3. Select the individual banks you want to test or select Bank n, Full Test, and press Enter. IDE device diagnostic tests The IDE device diagnostic tests work only with CD-ROM, DVD, and removable devices that use the ATAPI interface. 44 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide