IBM 86884RX Maintenance Manual - Page 160
SAL/EFI, messages
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
SAL/EFI messages The following is an example of a typical SAL/EFI message: Log Entry #: 2 Logging Source: SAL/EFI Log Type: E, I, or W Date: 06/17/2003 Time: 6:17:3 Recoverable Error handling example message This message indicates that a SAL/EFI error occurred at the recorded time. The following table lists all of the error codes and the actions to take in the event of an error code. Sometimes the first error to occur causes additional errors. In this case, the server displays more than one error message. Always follow the suggested action instructions for the first error message that appears. In the following error codes, X can be any number or letter. Error message/symptom B113 (CMOS read/write failure) B114 (SAL/EFI ROM checksum or Boot error.) B124 (Memory board: Controller initialization failed.) B231B (I/O card fault, Video initialization error.) B3121 (I/O board: Video: initialization error.) 062 (System failed three consecutive boot attempts.) 129 (Processor: x Internal cache error, removed from service.) 161 (CMOS battery failure.) 162 (CMOS checksum error.) 163 (Time or Date Error.) 175 (I/O Card Fault: Bad EEPROM CRC#1.) 178 (I/O Card Fault: EEPROM not functional.) 185 (All boot options failed.) FRU/action 1. Battery 2. I/O board 1. Update system firmware. 2. I/O board. Memory board I/O board I/O board 1. Update server to latest levels. 2. I/O board. 3. Processor board. 4. Processor. Processor x Battery 1. Battery 2. I/O board 1. Set time of day using the Configuration/Setup Utility program. 2. Battery. 3. I/O board. I/O board I/O board 1. Set the startup sequence using the Configuration/Setup Utility program. 2. I/O board. 150 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide