IBM 86884RX Maintenance Manual - Page 175
Code/Explanation, FRU/Action, Confirm, drive, con d., 050Ch, formatted, 050Dh, con d,
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 175 highlights
Code/Explanation FRU/Action 0509h (SCSI disk random write error.) 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 050Ch (Error in disk partition table .) 1. Confirm that drive is formatted and configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 050Dh (Boot sector error. The boot partition has an incorrect definition.) 1. Confirm that drive is formatted and configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 050Eh (Media error. The media description for the partition is bad. The unit is not properly formatted.) 1. Confirm that drive is formatted and configured. 2. Check drive cables and connections. 3. Drive. 4. I/O Board or SCSI add-on controller. 050Fh (The sector number information in the 1. Confirm that drive is formatted and configured. partition table is wrong. The unit is not properly OS formatted.) 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 0510h (No Tape in the drive.) 1. Check if a tape is in drive. 2. Confirm that drive is configured. 3. Check drive cables and connections. 4. Drive. 5. I/O board or SCSI add-on controller. 0511h (Positioning failed on tape drive.) 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 0512h (Tape read error.) 1. Check if write test has been run. 2. Confirm that drive is configured. 3. Check drive cables and connections. 4. Drive. 5. I/O board or SCSI add-on controller. 0515h (Tape Self-test error.) 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. 0516h (Tape buffer error.) 1. Confirm that drive is configured. 2. Check drive cables and connections. 3. Drive. 4. I/O board or SCSI add-on controller. Chapter 6. Symptom-to-FRU index 165