IBM 86884RX Maintenance Manual - Page 26
Setting, Remote, Supervisor, Adapter, features, Setup, requirements
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
3. Use the arrow keys to select the drive to format. Attention: Low-level formatting removes all data from the hard disk. If there is data you want to save, back up the hard disk before continuing this procedure. 4. Use the arrow keys or the End key to scroll to the right. 5. Select Format, and press Enter to start. Setting up the Remote Supervisor Adapter This section describes the Remote Supervisor Adapter features and setup requirements. It also explains how to cable and configure the adapter for use on an Advanced System Management (ASM) network so that you can manage the server from a remote location. For more detailed information, see the Remote Supervisor Adapter User's Guide on the IBM xSeries Documentation CD. Remote Supervisor Adapter features The Remote Supervisor Adapter has the following features: v Continuous health monitoring and control v Advanced Predictive Failure Analysis® (PFA) v Configurable notification and alerts v Time-stamped event logs that can be saved in nonvolatile memory and attached to e-mail alerts v Remote graphics console redirection v LAN, serial, and Advanced System Management (ASM) interconnect remote access v Point-to-point protocol (PPP) support v Simple Network Management Protocol (SNMP) v Domain Name System (DNS) and Dynamic Host Configuration Protocol (DHCP) support v Remote power control v Microsoft® Windows® Server 2003, Enterprise Edition (64-bit) blue-screen capture v Remote firmware update and access to critical server settings v Optional, independent power, which enables around-the-clock access to the server, even if the server is turned off Setup requirements Before you set up the Remote Supervisor Adapter, you must download the EFI Remote Supervisor Utility program from http://www.ibm.com/pc/support/ on the World Wide Web, and create a CD. You might need to enable the server to use the CD creation feature to create the Remote Supervisor Utility CD. If you have Microsoft Windows Server 2003, complete the following steps to enable the CD creation feature. Note: You cannot copy an ISO image or make a CD that recognizes the El Torito format using the CD creation feature. 1. Right-click My Computer. 2. Click Manage. 3. Double-click Services and Applications. 4. Double-click IMAPI CD-Burning COM Service. 16 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide