IBM 86884RX Maintenance Manual - Page 153
Media-extract, mechanism
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 153 highlights
Media-extract mechanism The server contains two media-extract mechanisms. Before you begin: v Read "Installation guidelines" on page 77. v Read the safety notices at "Safety notices (multilingual translations)" on page 201. v Read "Handling static-sensitive devices" on page 200. Complete the following steps to remove a media-extract mechanism from the server: 1. Turn off the server (see "Turning off the server" on page 8), and disconnect all power cords and external cables. 2. Remove the drive associated with the media-extract mechanism to be removed (see "Installing a 1.44 MB diskette drive" on page 96 or "Installing a CD-ROM or DVD-ROM drive" on page 97). 3. With a screwdriver, press the two notches on the media-extract mechanism until it pops free of the chassis. 4. Pull the media-extract mechanism out of the front of the server. 5. To install the media extract mechanism, reverse the above steps, sliding the media-extract mechanism into position until it snaps into place. Note: It might be easier to install the media-extract mechanism if the drive is installed in the bay before sliding the media-extract mechanism into position. Chapter 5. Field replaceable units 143