IBM 86884RX Maintenance Manual - Page 190
Power, supply, errors
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 190 highlights
Power supply LED errors Use the power supply LED information on the following page to troubleshoot power supply problems. Note: The minimum configuration required for the DC Good LED to come on is: v Power supply v Top power board AC good LED Off On On On On DC good LED Off Off On On On Front Power good power on indicators light (midplane) Off Off Off Off Blinking Off On Off On On Description FRU/action No power to system or ac problem. 1. Check ac power to system. 2. Power supply. 3. Top power board. DC source power problem Unplug the three power connectors to the midplane board. If the DC Good LED does not come on: 1. Inspect and replace any damaged power cables. 2. Check ac power to system. 3. Power supply. 4. Top power board. Standby power problem 1. Disconnect the following items from the midplane board to isolate the failing FRU: a. Light Path cable and SCSI power cable b. Memory-board assembly c. Processor-board assembly d. PCI or PCI-X adapters e. PCI-X board f. Remote Supervisor Adapter (watch for lit or flashing LEDs on I/O board) g. I/O board cable attachments 2. If LEDs are on after removal, replace the offending device. 3. If no LEDs are lit after step 1, replace the following: a. I/O board b. Midplane board Failure to power up POWER GOOD problem 1. Check indicators for a failing VRM; replace any failing VRMs. 2. Remove the adapters and disconnect cables and power connectors to all internal and external devices. Turn on the server. 3. If the Power Good LED comes on, replace the adapters and devices one at a time until you isolate the problem. 4. Power supply. 5. Top power board. 6. Midplane board. Power is OK. N/A 180 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide