IBM 86884RX Maintenance Manual - Page 162
Microprocessor
View all IBM 86884RX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 162 highlights
Error message/symptom FRU/action 240 (CPU board cache controller QuadT bus error) 1. Memory board 2. Processor board 3. Midplane board 241 (CPU board cache controller error) Processor board 245 (No configurable memory detected) 1. Verify DIMM installation order. 2. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 3. Replace failing DIMMs. 4. Memory board. 247 (Error port n after WIAP SMI) Memory board 248 (Memory board RIAP not complete on port n) Memory board 249 (Memory board RIAP failed on port n) Memory board 265 (Memory board SMI initialization error on port n) Memory board 266 (Service processor machine check reported, disabled 1. Reseat DIMMs, re-enable DIMMs, if necessary, DIMM x and DIMM y.) using the Configuration/Setup Utility program, and run diagnostics. 2. Replace failing DIMMs. 3. Memory board. 267 (Service processor machine check reported, disabled Processor board cache) 268 (Uncorrectable error isolated to DIMMs x and y.) 1. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 2. Replace failing DIMMs. 3. Memory board. 289 (Memory error detected, DIMM x disabled.) 1. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 2. Replace DIMM x. 3. Enable the DIMM using the Configuration/Setup Utility program. 4. Memory board. 291 (Protexion: error DIMM x and y) 1. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 2. Replace failing DIMM. 3. Memory board. 292 (Protexion: error DIMM x) 1. Reseat DIMMs, re-enable DIMMs, if necessary, using the Configuration/Setup Utility program, and run diagnostics. 2. Replace failing DIMM. 3. Memory board. 1162 (I/O board: Serial: port configuration error.) I/O board 1200 (Node 0/CPU slot x: CPUID y: Machine check exception.) 1. Microprocessor x 2. Processor board 152 IBM xSeries 450 Type 8688: Hardware Maintenance Manual and Troubleshooting Guide