Intel SE7501HG2 Product Guide - Page 33
Installation Procedures, Installing the I/O Gasket and Shield, Attaching the Gasket to the I/O Shield
View all Intel SE7501HG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Installation Procedures Installing the I/O Gasket and Shield ✏ NOTE An ATX 2.03-compliant I/O shield is provided with the server board. The shield is required by Electromagnetic Interference (EMI) regulations to minimize EMI. If the shield does not fit the chassis, obtain a properly sized shield from the chassis supplier. The shield fits the rectangular opening in the back of a chassis. The shield has cutouts that match the I/O ports. Install the shield from inside the chassis. Attaching the Gasket to the I/O Shield 1. Remove the two backing strips from the gasket. 2. Press the gasket onto the inside face of the I/O shield as shown. TP00028 Figure 3. Attaching the Gasket to the I/O Shield Installations and Upgrades 33
Installations and Upgrades
33
Installation Procedures
Installing the I/O Gasket and Shield
NOTE
An ATX 2.03-compliant I/O shield is provided with the server board.
The
shield is required by Electromagnetic Interference (EMI) regulations to
minimize EMI.
If the shield does not fit the chassis, obtain a properly sized
shield from the chassis supplier.
The shield fits the rectangular opening in the back of a chassis.
The shield has cutouts that match
the I/O ports.
Install the shield from inside the chassis.
Attaching the Gasket to the I/O Shield
1.
Remove the two backing strips from the gasket.
2.
Press the gasket onto the inside face of the I/O shield as shown.
TP00028
Figure 3.
Attaching the Gasket to the I/O Shield