Intel SE7501HG2 Product Guide - Page 69
Table 14., Peripheral Configuration Submenu, Parallel Port Modes
View all Intel SE7501HG2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Table 14. Peripheral Configuration Submenu (continued) Parallel Port Mode Normal Bi-directional EPP ECP Parallel Port Modes: Normal - Output only. The standard printer connection. Bi-directional - Standard bi-directional mode. Enhanced parallel port (EPP) - Selection based on which EPP version the printer supports. Only choose a mode that the parallel port device (such as a printer) supports. Check the parallel port device documentation for this information. If this information cannot be located, use the default setting. Extended capabilities port (ECP) - Select only if the printer supports it. ECP uses hardware to generate handshaking signals, similar to EPP. However, it uses DMA channels to move data, a FIFO buffer to send and receive data, and real-time data compression. ECP Mode DMA Channel 0 1 2 3 Selects the DMA channel for ECP mode. Diskette Controller Enabled Disabled Enables or disables the diskette controller in the Super I/O. Legacy USB Support Disabled Keyboard only Auto Keyboard and Mouse If disabled, legacy USB support is turned off at the end of BIOS POST. Front Panel USB Enabled Disabled If disabled, the front panel USB ports are inactive. Table 15. Memory Configuration Submenu Feature Choices or Display Only Description Extended Memory Test 1 MB 1 KB Every Location Disabled Selects the size of step to use during the extended RAM tests. When disabled is selected, extended memory tests are not run. The Every Location selection will increase the boot time. Memory Bank #1 (DIMM 1A and 1B) Installed Not Installed Disabled Displays the current status of Memory Bank 1. Disabled indicates that a DIMM in the bank has failed and the entire bank has been disabled. Memory Bank #2 (DIMM 2A and 2B) Installed Not Installed Disabled Displays the current status of Memory Bank 2. Disabled indicates that a DIMM in the bank has failed and the entire bank has been disabled. Memory Bank #3 (DIMM 3A and 3B) Installed Not Installed Disabled Displays the current status of Memory Bank 2. Disabled indicates that a DIMM in the bank has failed and the entire bank has been disabled. Memory Retest Enabled Disabled When enabled is selected, the BIOS retests all memory on the next boot. This option automatically reverts to disabled upon booting. POST and the BIOS Setup Utility 69