Netgear XSM4348CS User Manual - Page 107

M4300 Intelligent Edge Series Fully Managed Stackable Switches The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Services > DHCP L2 Relay > DHCP L2 Relay Global Configuration. 5. Select the Admin mode Disable or Enable radio button. For global configuration, this enables or disables the DHCP L2 Relay on the switch. The default is Disable. 6. For VLAN configuration, VLAN ID shows the VLAN ID configured on the switch. a. Use Admin mode to enable or disable the DHCP L2 Relay on the selected VLAN. b. Use Circuit ID mode to enable or disable the Circuit ID suboption of DHCP Option-82. c. Use Remote ID String to specify the Remote ID when Remote ID mode is enabled. 7. Click the Apply button. Your settings are saved. The pagination navigation menu functions as follows: - Rows per page. Select how many table entries are displayed per page. Possible values are 20, 50, 100, 200, and All. If you select All, the browser might be slow to display the information. - . Display the next page of the table data entries. Configure a DHCP L2 Relay Interface To configure DHCP L2 Relay: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. Configure System Information 107 User Manual