Netgear XSM4348CS User Manual - Page 490

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure DiffServ IPv6 Class Settings You can add a new IPv6 DiffServ class name, or to rename or delete an existing class. You can also define the criteria to associate with a DiffServ class. As packets are received, these DiffServ classes are used to prioritize packets. You can use multiple match criteria in a class. The logic is a Boolean logical-AND for this criteria. After creating a class, click the class link to the Class page. To configure DiffServ IPv6 class settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > DiffServ > Advanced > IPv6 Class Configuration. 5. To create a new class, enter a class name, select the class type, and click the Add button. This field also lists all the existing DiffServ class names, from which one can be selected. The switch supports only the Class Type value All, which means all the various match criteria defined for the class is satisfied for a packet match. All signifies the logical AND of all the match criteria. Only when a new class is created, this field is a selector field. After class creation this becomes a nonconfigurable field displaying the configured class type. 6. To rename an existing class, select the check box next to the configured class, and update the name 7. Click the Apply button. Your settings are saved. 8. After creating a class, click the class name for an existing class. The class name is a hyperlink. Configure Quality of Service 490 User Manual