Netgear XSM4348CS User Manual - Page 73

M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 21. SNTP Server Status (continued) Field Last Attempt Status Requests Failed Requests Description The status of the last S9 NTP request to this server. If no packet was received from this server, a status of Other is displayed. • Other. None of the following enumeration values. • Success. The SNTP operation was successful and the system time was updated. • Request Timed Out. A directed SNTP request timed out without receiving a response from the SNTP server. • Bad Date Encoded. The time provided by the SNTP server is not valid. • Version Not Supported. The SNTP version supported by the server is not compatible with the version supported by the client. • Server Unsynchronized. The SNTP server is not synchronized with its peers. This is indicated through the leap indicator field on the SNTP message. • Server Kiss Of Death. The SNTP server indicated that no further queries were to be sent to this server. This is indicated by a stratum field equal to 0 in a message received from a server. The number of SNTP requests made to this server since last agent reboot. The number of failed SNTP requests made to this server since last reboot. Configure Daylight Saving Time Settings To configure the Daylight Saving Time settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Management > Time > Daylight Saving Configuration. Configure System Information 73 User Manual