Netgear XSM4348CS User Manual - Page 361

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. In the Default Information Originate field, select the Enable or Disable option. If you select Enable, OSPF originates an external LSA advertising a default route (0.0.0.0/0.0.0.0). Default Information Originate is disabled by default. 6. In the Always field, select True or False. If Default Information Originate is enabled, but the Always option is False, OSPF originates a default route only if a default route is already in the router's routing table. Set Always to True to force OSPF to originate a default route regardless of whether a default route already exists. The default is False. 7. In the Metric field, specify the metric of the default route. The valid values range from 0 to 16777214. The default is 0. 8. In the Metric Type field, select the OSPF metric type of the default route. Two types are supported: External Type 1 and External Type 2. The default is External Type 2. 9. Click the Apply button. Your settings are saved. Configure OSPF Settings To configure the OSPF settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing > OSPF > Advanced > OSPF Configuration. Configure OSPF and OSPFv3 361 User Manual