Netgear XSM4348CS User Manual - Page 424

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the Admin Mode Disable or Enable radio button. This sets the administrative status of DVMRP to active or inactive. The default is Disable. 6. Click the Apply button. Your settings are saved. The following table describes the nonconfigurable information that is displayed. Table 155. DVMRP Global Configuration Field Version Total Number of Routes Reachable Routes Description The current value of the DVMRP version string. The number of routes in the DVMRP routing table. The number of routes in the DVMRP routing table that use a non-infinite metric. Configure the DVMRP Interface To configure the multicast DVMRP interface: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > DVMRP > Interface Configuration. Configure Multicast Routing 424 User Manual