Netgear XSM4348CS User Manual - Page 179

M4300 Intelligent Edge Series Fully Managed Stackable Switches View NSF Checkpoint Statistics To view NSF checkpoint statistics: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Chassis > NSF > Checkpoint Statistics. 5. To reset the statistics on the page, click the Clear button. 6. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 65. NSF Checkpoint Statistics Field Description Messages Checkpoint The number of messages sent from the supervisor to the backup blade. Bytes Checkpointed How much data was sent from the supervisor until to the backup blade. Time Since Counters Cleared The amount of time since the counters were reset. Checkpoint Message Rate The number of seconds between measurements. Last 10-second Message Rate How many messages were sent in the last measurement interval. Highest 10-second Message Rate The highest number of messages that were sent in a measurement interval. Manage Stacking 179 User Manual