Netgear XSM4348CS User Manual - Page 599

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Control > Captive Portal > CP Client. 5. To refresh the page with the latest information on the switch, click the Refresh button. 6. To clear the information in the client table, click the Clear button. The following table describes the nonconfigurable information displayed on the page.t Table 215. Captive Portal Client Field MAC Address IP Address Drops Protocol Verification Session Time Interface CP ID User Name Bytes Received Bytes Transmitted Packets Received Packets Transmitted Description Shows the client MAC address. Identifies the IP address of the client (if applicable). Shows the current connection protocol, which is either HTTP or HTTPS. Shows the current account type, which is Guest, Local, or RADIUS. Shows the amount of time that passed since the client was authorized. Identifies the interface the client is using. The ID of the captive portal instance. The user name (or guest ID) of the connected client. Total bytes the client received. Total bytes the client transmitted. Total packets the client received. Total packets the client transmitted. Set Up and Manage Access Control Lists Access control lists (ACLs) ensure that only authorized users can access specific resources while blocking off any unwarranted attempts to reach network resources. ACLs are used to Manage Switch Security 599 User Manual