Netgear XSM4348CS User Manual - Page 667
Con the sFlow Interface, Receiver Owner, Receiver Timeout, No Timeout, False
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 667 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Next to the Receiver Index columns, select the check box for the receiver for which data must be displayed or configured. The allowed range to 1 to 8. 6. In the Receiver Owner field, specify the receiver owner. This is the entity making use of this sFlowRcvrTable entry. The empty string indicates that the entry is currently unclaimed and the receiver configuration is reset to the default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string. The entry must be claimed before any changes can be made to other sampler objects. 7. In the Receiver Timeout field, specify the time (in seconds) remaining before the sampler is released and stops sampling. A management entity wanting to maintain control of the sampler is responsible for setting a new value before the old one expires. The valid range is 0 to 2147483647. A value of zero essentially means the receiver is not configured and sets the selected receiver configuration to its default values. When configuring the sFlow receiver settings, you must select the Timeout Mode option before you can configure a Timeout Value. 8. From the No Timeout menu, select True or False to set the no time-out sampling for the receiver. Sampling is not stopped until the No Timeout selected entry is True. The default value is False. 9. In the Maximum Datagram Size field, specify the maximum number of data bytes that can be sent in a single sample datagram. Set this value to avoid fragmentation of the sFlow datagrams. The default value is 1400. The allowed range is 200 to 12188. 10. In the Receiver Address field, specify the IP address of the sFlow collector. If set to 0.0.0.0, no sFlow datagrams are sent. 11. In the Receiver Port field, specify the destination port for sFlow datagrams. The allowed range is 1 to 65535. 12. The Receiver Datagram Version field displays the version of sFlow datagrams to be sent. 13. Click the Apply button. Your settings are saved. Configure the sFlow Interface sFlow agent collects statistical packet-based sampling of switched flows and sends them to the configured receivers. A data source configured to collect flow samples is called a sampler. sFlow agent also collects time-based sampling of network interface statistics and sends them to the configured sFlow receivers. A data source configured to collect counter samples is called a poller. Monitor the Switch and Network 667 User Manual
![](/manual_guide/products/netgear-m43008x8f-user-manual-f5d4e6f/667.png)