Netgear XSM4348CS User Manual - Page 493

M4300 Intelligent Edge Series Fully Managed Stackable Switches The following table describes the nonconfigurable information displayed in the Class Summary at the bottom of the DiffServ Advanced IPv6 Class Configuration page. Table 187. DiffServ IPv6 Class Configuration - Class Summary Field Match Criteria Values Description The configured match criteria for the specified class. The values of the configured match criteria. Configure DiffServ Policy You can associate a collection of classes with one or more policy statements. After creating a policy, click the policy link to the Policy page. To configure DiffServ policy: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > DiffServ > Advanced > Policy Configuration. 5. Use Policy Name to uniquely identify a DiffServ policy using a case-sensitive alphanumeric string from 1 to 31 characters. 6. In the Member Class list, select a DiffServ class. This lists all existing DiffServ classes currently defined as members of the specified policy. This list is automatically updated as a new class is added to or removed from the policy. This field is a selector field only when an existing policy class instance is to be removed. After removal of the policy class instance this becomes a nonconfigurable field. 7. Policy Type. The traffic flow direction to which the policy is applied. • In indicates the type is specific to inbound traffic direction. • Out indicates the type is specific to outbound traffic direction. Configure Quality of Service 493 User Manual