Netgear XSM4348CS User Manual - Page 329

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure an IPv6 Static Route Configure an IPv6 static route: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> IPv6 > Advanced > Static Route Configuration. 5. In the IPv6 Prefix field, specify the IPv6 prefix for the configured route. 6. In the Prefix Length field, specify the IPv6 prefix length for the configured route. 7. In the Next Hop IPv6 Address Type list, select one of the following options: • Global IPv6 Address. • Link-Local IPv6 address. If the next hop IPv6 address specified is a link-local IPv6 address, then specify the interface for the link-local IPv6 next hop address. • Static-Reject. Select Static-Reject to create a static-reject route for a destination prefix. No next hop address is specified in that case. 8. Enter the Next Hop IPv6 Address for the configured route. 9. Select from the Interface list to specify in unit/slot/port format, the link-local IPv6 next hop address. This field is enabled only if Link-Local is selected. 10. Specify the route Preference of the configured route. 11. Click the Add button. The route is added. Manage Routing 329 User Manual