Netgear XSM4348CS User Manual - Page 481

M4300 Intelligent Edge Series Fully Managed Stackable Switches The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS> DiffServ > DiffServ Wizard. 5. Use Traffic Type to define the DiffServ Class. Traffic type options are: VOIP, HTTP, FTP, Telnet, and Every. 6. Ports displays the ports which can be configured to support a DiffServ policy. The DiffServ policy is added to selected ports. 7. Use Enable Policing to add policing to the DiffServ policy. The policing rate to be applied. 8. Specify the Committed Rate: • When Policing is enabled, the committed rate is applied to the policy and the policing action is set to conform. • When Policing is disabled, the committed rate is not applied and the policy is set to markdscp. 9. Specify the Outbound Priority: • When Policing is enabled, Outbound Priority defines the type of policing conform action where: High sets action to markdscp ef, Med sets the action to markdscp af31, and Low sets the action to send. • When Policing is disabled, Outbound Priority defines the policy where: High sets the policy to mark ipdscp ef, Med sets policy to mark ipdscp af31, and Low sets the policy to mark ipdscp be. 10. Click the Apply button. Your settings are saved. Configure Quality of Service 481 User Manual