Netgear XSM4348CS User Manual - Page 557

M4300 Intelligent Edge Series Fully Managed Stackable Switches 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Security > Traffic Control > Port Security > Interface Configuration. 5. Use one of the following methods to select a port: • In the Go To Port field, enter the interface in the unit/slot/port format and click on the Go button. • Next to the Port column, select the check box for the port that you want to configure, select multiple check boxes to apply the same setting to all selected ports, or select the check box in the table heading to apply the same settings to all ports. 6. Specify the following settings: • Security Mode. Enables or disables the port security feature for the selected interface. • Max Allowed Dynamically Learned MAC. Sets the maximum number of dynamically learned MAC addresses on the selected interface. • Max Allowed Statically Locked MAC. Sets the maximum number of statically locked MAC addresses on the selected interface. • Violation Traps. Enables or disables the sending of new violation traps designating when a packet with a disallowed MAC address is received on a locked port. 7. Click the Apply button. Your settings are saved. Manage Switch Security 557 User Manual