Netgear XSM4348CS User Manual - Page 473

M4300 Intelligent Edge Series Fully Managed Stackable Switches The default value is untrusted. 9. Click the Apply button. Your settings are saved. Map 802.1p Priorities to Queues The 802.1p to Queue Mapping page also displays the Current 802.1p Priority Mapping table. To map 802.1p priorities to queues: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > CoS > Advanced > 802.1p to Queue Mapping. 5. Use Interface to select interfaces. You can specify CoS configuration settings per-interface or for all CoS configurable interfaces. 6. Specify which internal traffic class to map the corresponding 802.1p value. The queue number depends on the specific hardware. The 802.1p Priority row contains traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic and is sent using best effort. Traffic with a higher priority, such as 3, might be time-sensitive traffic, such as voice or video. The values in each list represent the traffic class. The traffic class is the hardware queue for a port. Higher traffic class values indicate a higher queue position. Before traffic in a lower queue is sent, it must wait for traffic in higher queues to be sent. Configure Quality of Service 473 User Manual