Netgear XSM4348CS User Manual - Page 434

M4300 Intelligent Edge Series Fully Managed Stackable Switches View IGMP Groups To view the IGMP groups: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > IGMP > IGMP Groups. 5. Use the Search menu to search for multicast entries by interface or group: • Select Interface from the menu, enter the interface in unit/slot/port format (for example 1/0/13), and click the Go button. If the entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Select Group from the menu, enter the multicast group IP address, and click the Go button. If the entry exists, that entry with the matching group is displayed as the first entry, followed by the remaining entries. An exact match is required. 6. To refresh the page with the latest information on the switch, click the Refresh button. The following table describes the nonconfigurable information that is displayed. Table 162. Multicast IGMP Groups Field Interface Multicast Group IP Last Reporter Description The interface for which data is to be displayed. The IP multicast group address for which data is to be displayed. The IP address of the source of the last membership report received for the IP multicast group address on the selected interface. Configure Multicast Routing 434 User Manual