Netgear XSM4348CS User Manual - Page 426

M4300 Intelligent Edge Series Fully Managed Stackable Switches Search for DVMRP Neighbors To search for DVMRP neighbors: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> Multicast > DVMRP > DVMRP Neighbor. 5. Use the Search menu to search for neighbor entries by MAC interface or neighbor IP address: • Select Interface from the menu, enter the interface in unit/slot/port format (for example 1/0/13), and click the Go button. If the neighbor entry exists, the entry is displayed as the first entry, followed by the remaining entries. • Select Neighbor IP from the menu, enter the neighbor IP address, and click the Go button. If the entry with the matching neighbor IP exists, the entry is displayed as the first entry, followed by the remaining entries. An exact match is required. The following table describes the nonconfigurable information that is displayed. Table 157. DVMRP Neighbor Field Interface Neighbor IP State Up Time Description Select the interface for which data is to be displayed, or all the interfaces are displayed. The IP address of the neighbor whose information is displayed The state of the specified neighbor router on the selected interface, either active or down. The DVMRP uptime for the specified neighbor on the selected interface. This is the time since the neighbor entry was learned. Configure Multicast Routing 426 User Manual