Netgear XSM4348CS User Manual - Page 478

M4300 Intelligent Edge Series Fully Managed Stackable Switches Configure CoS Drop Precedence Settings To configure CoS Drop Precedence settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select QoS > CoS> Advanced > CoS Queue Drop Precedence Configuration. 5. Use Interface to specify all CoS configurable interfaces. 6. Use Queue ID to specify all the available queues. Valid values are 0 to 6. The default is 0. 7. Use Drop Precedence Level to specify all the available drop precedence levels. Valid values are 1 to 4. The default is 1. 8. Use WRED Minimum Threshold to specify the weighted RED minimum queue threshold below which no packets are dropped for the current drop precedence level. The range is 0 to 100. The default is 40. 9. Use WRED Maximum Threshold to specify the weighted RED maximum queue threshold above which all packets are dropped for the current drop precedence level. The range is 0 to 100. The default is 100. Configure Quality of Service 478 User Manual