Netgear XSM4348CS User Manual - Page 113

M4300 Intelligent Edge Series Fully Managed Stackable Switches 5. Select the Admin mode Disable or Enable radio button. This specifies whether the DHCPv6 Service administrative mode is enabled or disabled The default value is Disable. 6. Use the DHCPv6 Server DUID field to specify the DHCP Unique Identifier (DUID) of the DHCPv6 server. 7. Click the Apply button. Your settings are saved. Configure the DHCPv6 Pool You can view the currently configured DHCPv6 server pools as well as to add and remove pools. A DHCPv6 server pool is a set of network configuration information available to DHCPv6 clients that request the information. To configure DHCPv6 pool settings: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select System > Services > DHCPv6 Server > DHCPv6 Pool Configuration. Configure System Information 113 User Manual