Netgear XSM4348CS User Manual - Page 662

M4300 Intelligent Edge Series Fully Managed Stackable Switches 8. Click the Apply button. Your settings are saved. Traffic of the selected interfaces is sent to the probe port. The Status field indicates the interface status. Configure the RSPAN Destination Switch To configure the RSPAN destination switch: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Monitoring > Mirroring > RSPAN Destination Switch Configuration. 5. From the Session ID list, select the session ID. 6. Select the Admin Mode True (enabled) or False (disabled) radio button for the selected session. When a particular session is enabled, any traffic entering or leaving the source ports of the session is copied (mirrored) onto the corresponding destination port or a remote switched port analyzer (RSPAN) VLAN. By default, the Admin mode is disabled. 7. Select the RSPAN Source VLAN from the list of available VLAN IDs. 8. Select the RSPAN Destination VLAN from the list of destination interfaces. 9. Configure the Filter Type. Monitor the Switch and Network 662 User Manual