Netgear XSM4348CS User Manual - Page 339

M4300 Intelligent Edge Series Fully Managed Stackable Switches The pagination navigation menu functions as follows: - Rows per page. Select how many table entries are displayed per page. Possible values are 20, 50, 100, 200, and All. If you select All, the browser might be slow to display the information. - . Display the next page of the table data entries. The following table describes the nonconfigurable information displayed on the page. Table 120. ARP Cache Field IP Address Port MAC Address Type Age Description The IP address. It must be the IP address of a device on a subnet attached to one of the switch's existing routing interfaces. The associated unit/slot/port of the connection. The unicast MAC address of the device. The address is six two-digit hexadecimal numbers separated by colons, for example 00:06:29:32:81:40. The type of ARP entry. Possible values are as follows: • Local. An ARP entry associated with one of the switch's routing interface's MAC addresses. • Gateway. A dynamic ARP entry whose IP address is that of a router. • Static. An ARP entry configured by the user. • Dynamic. An ARP entry that was learned by the router. Age since the entry was last refreshed in the ARP table (in seconds). View or Configure the ARP Table You can change the configuration parameters for the Address Resolution Protocol (ARP) table. You can also use this page to display the contents of the table. To configure the ARP table: 1. Launch a web browser. 2. In the address field of your web browser, enter the IP address of the switch. The login window opens. 3. Enter admin as the user name, enter your local device password, and click the Login button. The first time that you log in, no password is required. However, you then must specify a local device password to use each subsequent time that you log in. The System Information page displays. 4. Select Routing> ARP > Advanced > ARP Table Configuration. Manage Routing 339 User Manual